|
Synthetic
Polymers
(Section 12) |
                            .htm_cmp_copy-of-nature010_vbtn.gif)   |
|||
| 12-2 Synthetic Polymers - Thermoplastic Types Assorted - Heat applied to a solidified piece of the material will soften it again. | |||
| 12-2.1 ABS (Acrylonitrile-Butadiene-Styrene) | |||
 12-2.1 ABS |
 12-2.1 ABS (Nylon OME) (Snap-together) |
 12-2.1 ABS (Snap-together) Nylon OME with pearlized DF |
 12-2.1 ABS |
| 12-2.2 Acrylic Resin (Lucite, Plexiglas, etc.) | |||
 12-2.2 Acrylic Resin |
 12-2.2 Acrylic Resin |
 12-2.2 Acrylic Resin (background) |
 12-2.2 Acrylic Resin |
 12-2.2 Acrylic Resin (OME) |
 12-2.2 Acrylic Resin |
 12-2.2 Acrylic Resin |
 12-2.2 Acrylic Resin (Plexiglas) |
 12-2.2 Acrylic Resin |
 12-2.2 Acrylic Resin |
 12-2.2 Acrylic Resin |
 12-2.2 Acrylic Resin |
 12-2.2 Acrylic Resin (in metal) |
 12-2.2 Acrylic Resin (Twisted) |
 12-2.2 Acrylic Resin |
 12-2.2 Acrylic Resin |
| 12-2.3 Cellulose Acetate (Tenite, Rhodoïd, etc) | |||
 12-2.3 Cellulose Acetate |
 12-2.3 Cellulose Acetate BM "Diamond D" |
 12-2.3 Cellulose Acetate BM 'Diamond D" - "Patent #" |
 12-2.3 Cellulose Acetate |
 12-2.3 Cellulose Acetate Rhodoïd - L. Stein |
 12-2.3 Cellulose Acetate (Sculpted) |
 12-2.3 Cellulose Acetate Injection molded |
 12-2.3 Cellulose Acetate |
 12-2.3 Cellulose Acetate Coated and cut |
 12-2.3 Cellulose Acetate |
 12-2.3 Cellulose Acetate Pearlized Rhodoïd |
 12-2.3 Cellulose Acetate (OME) |
 12-2.3 Cellulose Acetate |
 12-2.3 Cellulose Acetate |
 12-2.3 Cellulose Acetate |
 12-2.3 Cellulose Acetate |
| 12-2.4 Nylon | |||
 12-2.4 Nylon |
 12-2.4 Nylon (ABS OME) |
 12-2.4 Nylon (Snap-together) |
 12-2.4 Nylon (Snap-together) |
 12-2.4 Nylon |
 12-2.4 Nylon |
 12-2.4 Nylon |
 12-2.4 Nylon |
| 12-2.5 Polymer Clay (FIMO, Sculpey III, etc.) | |||
 12-2.5 Polymer Clay |
 12-2.5 Polymer Clay |
 12-2.5 Polymer Clay |
 12-2.5 Polymer Clay |
| 12-2.6 Polystyrene | |||
 12-2.6 Polystyrene |
 12-2.6 Polystyrene |
 12-2.6 Polystyrene |
 12-2.6 Polystyrene |
|
12-3 Synthetic Polymers - Back Marks |
|||
 12-3 BM - "Artid - Made in England" Black Artid is Phenolic Resin |
 12-3 BM - "MMM" |
 12-3 BM - "Expedit - Paris" |
 12-3 BM - "LaMode" |
|
12-4 Synthetic Polymers - Back Types - Click here to see table of back types in the Synthetic Polymers Handbook |
|||
 12-4 Back Types - (Metal Loop Shank) |
 12-4 Back Types - (Hourglass wedge) With knockout pin mark |
 12-4 Back Types - (Snap together) |
 12-4 Back Types - (Sew through) |
 12-4 Back Types - (Tunnel) |
 12-4 Back Types - (Curved Needle self-shank) |
 12-4 Back Types - (Slab) |
 12-4 Back Types - (Curved Slab) |
|
|
|||
